Setup a local network, and control multiple games on multiple PCs
by Support » Mon Dec 13, 2010 2:30 pm
|
To setup the iBox network, click the network icon. |
In the NCP, you can connect or disconnect the network. |
The Network Server Parameters
State |
To start iBox in server mode:
|
Host |
The host PC to connect to.
(Not used in [Server] mode, but will display the computer name) |
Port |
The port, the network will use.
|
After setting the parameters, press the [Connect] button, to start the server
The server is now ready to have network clients connect to it.
The Network Client Parameters
State |
To start iBox in client mode:
|
Host |
The host PC to connect to. (The name of the computer on you local network or an IP address)
|
Port |
The port, the network will use.
|
After setting the parameters, press the [Connect] button, to start the client
The client connected to the server.
And the server will comfirm that a client was connected
The iBox network is now ready to control GameClients via the network.
-
Support
- Customer Support
-
- Posts: 31
- Joined: Wed Nov 10, 2010 6:26 pm
Return to The Network Control Panel
Who is online
Users browsing this forum: No registered users and 1 guest